PPG XYLAN®
To contact us for more information on this product click here >>
-
Description
Xylan coatings help improve performance and extend the life of components. This trusted technology protects from corrosion, chemicals and abrasion, as well as provides low-friction properties to improve release compared to uncoated parts. Xylan is a proven solution for use in many markets including Automotive, Energy Generation, Oil and Gas.
-
Chemistry
Several options include PTFE, Epoxy, PFA and FEP powders, PAI, Silicone, PPS, and Silicone Polyester.
-
Application
- Conventional Spray
- Electrostatic Spray
- Dip Spin
- Coil
- Knife-Over-Air
-
Benefits
- Controlled low friction
- Corrosion resistance
- Chemical resistance
- Wear and abrasion resistance
- Nonstick properties
-
Suggested End Uses
- Fasteners
- Tooling
- Piping and Tubing
- Valves and Actuators
- Pistons and Pumps
- General Components
- Molds
Technical Properties*
| Property | Standard | Results |
|---|---|---|
| Corrosion resistance | ASTM B117 ASTM D610 |
>5000 hours / rust grade 10 |
| Coefficient of friction | ASTM G99 | 0.05 – 0.12 |
| Working temperature range | -- | -195°C - +260°C / -319°F - +500°F |
| Dry-film thickness | ASTM D1186 | 15 – 25 μm / 0.6 – 1.0 mils (1 or 2 coats is typical, which reflects the TDS) |
| Film hardness | ASTM D3363 | 2H - 4H per coat (1 or 2 coats is typical, which reflects the TDS) |
| *This data is for Xylan 1070 |
Product Characteristics
| Color | Wide color range |
| Operating temperature range | -195°C - +260°C / -319°F - +500°F |
| Optimum Cure Temperature | 240°C / 465°F for 20 minutes |