To contact us for more information on this product click here >>

  • Description

    Inorganic, Zinc flake coating, formulated to provide corrosion resistance on fastener systems.

  • Chemistry

    Zinc Flake

  • Application


  • Benefits

    • Controlled low friction
    • High in-service temperature use
    • Good corrosion resistance
    • Good chemical resistance
    • Usable as stand-alone or as part of an overall coating system
    • Low dry film build
  • Suggested End Uses

    • Studs
    • Bolts
    • Nuts
    • Washers

Product Characteristics

Color Silver
In-service temperature (continuous) +250°C / +480°F
Cure temperature range 240°C - 270°C / 465°F - 520°F
Gloss (ASTM D523) ≤ 10%

Technical Properties*

Property Standard Results
Dry Film Thickness ASTM D7091-20 8 - 15 microns
Dynamic Coefficient of Friction ASTM G99-17 Static 0.14 / Dynamic 0.10
Corrosion Resistance¹ ASTM B117-18 / ASTM D610-08
≤2,500 hours / ≤Rust Grade 10
Pencil Hardness ASTM D3363-20 ≥ 8H
Adhesion ISO 10683:2018 No adhesion loss
Chemical resistance² ASTM 1308-20 MEK - no effect
*Typical film properties determined over on gritblasted mild steel substrate
¹Corrosion resistance determined with 01-411 series primer and 1424 series topcoat
²Chemical resistance by spot test, over 24 hours at room temperature